Kit #2 Ceramic Maintenance Directions

  1. Use #901 Car Wash Shampoo and long microfiber large Car Wash Sponge. Rinse sponge after every pass over your paint to remove dirt with 2nd bucket method, or use hose to wash off dirt from soapy sponge…then rinse car.

    Rinsing Tip: Remove nozzle from your hose and rinse your car from top to bottom with low water pressure allowing gravity to pull excess water away from your car.
  2. Dry your car with the Green 16×16 towels. One in each hand if you like.
  3. Use 22oz 973-QD Ceramic Quick Detailer with Graphene, Waterless Wash, applied in Step 4. Use after washing and drying your car and between car washes to remove light dust and bird droppings. Detail your car nearly anywhere with no water hose. 973-QD cleans and adds gloss and durability with each use without scratching your paint. Can also be used to clean glass.
  4. Two-sided Towels (over 1,000gsm) to apply and buff 973-QD Quick Detailer. Fold twice for a easy to handle 8×8 inch towel size. Spray grey short fiber twisted microfiber side first with 973-QD used to remove light dust and bird droppings. Flip towel over, fold twice for 8×8 inch towel size and spray 973-QD again onto the long microfiber towel side, and buff till dry to a high gloss. Suggest spraying towel with 973-QD with an “X” pattern, then horizontal and vertical lines of spray, onto the 8×8 size towel after folding twice to fully cover the folded 8×8 towel.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.