Shop
Showing 1–24 of 55 results
- Main Sleeping Area: 9′ x 8′ floor area, 7.5′ center ceiling height. Sleep 3 adults in the tent, plus 2 inside your Tesla.
- Seamless Floor is made of waterproof PE (Polyethylene fabric), which is stain and tear resistant.
- Walls and Roof: 210T Polyester Denier Ripstop fabric, Waterproof, sealed seams. No need for a rainfly.
- Awning: 7 x 11 feet providing 7x9 foot area of useable ground space under the awning
- Main Tent Center Height: 7.5 feet
- Rapid set up and take down.
- (4) Zippered Power Cord Openings. 1 located on the awning side, 1 on the connecting sleeve side for charging your Tesla and 1 under each of 2 windows, so you can, for example, run wire from solar panels into the tent to charge and use a Power Station.
- Aluminum Telescoping Poles for tent support Frame are .78 Inch (20mm) in diameter, natural aluminum color.
- Storage for small items inside main tent: 2 side wall pockets, 1 roof gear loft with cord to hang light or mosquito zapper.
- Velcro Loops pre-installed on the awning to attach USB String Lights and to suspend the included Projection screen both inside the tent and awning.
- Projection Screen, 45.6 inch diagonal 16:9 Aspect Ratio (40 wide x 22 High), for viewing slide shows and videos inside the tent or suspended from the awning.
- Projector not included.
- 2 Large Windows: Screened with zippered with storm flap cover
- 1 Zippered Door with screen and storm flap cover.
- 1 Magnetic Sleeve that connects over the hatchback door to attach to the Tesla.
- Strong metal ground stakes.
- Primary Colors, Light Grey tent body with dark grey trim.
- DOCKING STATION graphic located under 2 windows
- Carry bag with straps 52″ x 11″ x 11″ 26 pounds loaded.
- Connecting sleeve can be unzipped from the tent making it a free-standing tent.
- 3 Season use
- Entryway "Lobby" Storage Area: 7.5 x 5.5 x 4.9 feet, (Trapezoid) x 6.3 feet tall.
- Magnetic Screen Door provides hands-free entrance into, and out of the tent. Automatically Closes behind you to keep bugs out.
- 3 Zippered power cord openings. One on the connecting sleeve side. One on the Awning Side and one on the Window Side
- Clothes line located in the entryway "lobby".
- Carry Bag: 52x12x12 inches. Weight in the carry bag 28lbs
- Main Sleeping Area: 7.8 x 7.8 x 6.5 feet tall, Sleep 3-4 in the tent, plus 2 in your Tesla.
- Entryway Floor Area: 7.5 x 5.5 x 4.25 feet, (Trapezoid) Incudes a magnetic door for hands free Entrance and Exit.
- Waterproof Seamless Floor in both sleeping area and Lobby rooms are made of PE (Polyethylene fabric), which is stain and tear resistant, and waterproof.
- Walls and Roof: 210T Polyester Denier Ripstop fabric, Waterproof, sealed seams. No need for a rainfly.
- Magnetic Door provides hands-free entrance into, and exit from the tent. Closes behind you to keep bugs out.
- Awning: 7 x 9 feet, and can be moved to any side of the tent. 2 steel poles and guy ropes included
- Main Tent Center Height: 6.5 feet (2 Meters)
- 3 Power Cord Openings, one near the Magnetic Door, and 2 located, one on each side of the main tent space, so you can, for example, run wire from solar panels into the tent to charge and use a Power Station.
- Aluminum Telescoping Poles for tent support Frame are .86 Inch or 22mm diameter natural aluminum color
- Storage inside main tent: 2 side wall pockets, 1 roof gear loft.
- Loops to attach Lights: in Ceiling of main tent and in entryway area. (Lights not included)
- 2 Large Windows: Screened with zippered with storm flaps covers
- 1 Zippered Door
- 1 Magnetic Door at entryway
- Upgraded V shape metal ground stakes.
- Primary Colors, Light Grey tent body with Aluminum Poles and black Trim
- Moon and Stars DOCKING STATION graphic located under one window
- Carry bag with straps 42" x 8.25" x 8.25"
- 3 Season use.[spacer height="15px" id="2"]
“Docking Station” will be made as two versions. DS-1 is a one room Tent and DS-2 is a two room tent with storage room for your gear and a walk-through magnetic door. Both DS-1 and DS-2 attach to your Tesla. with Hands Free Walk-through door and space for your gear. Sleeps up to 4 adults. ETA July-August 2022
This spacious Tent is perfect for Road Trips and weekend camping get-a-ways.[spacer height="15px" id="2"]
“Docking Station” Tents I and II Connect to your Model Y. Sleep 2 in your Y and 2-4 in the tent. ETA May 2023
These spacious Tents are perfect for Road Trips and Camping[spacer height="15px" id="2"]
You may place your order now as a reservation. No charge will be made until the tent can be shipped, likely by April of 2023.[spacer height="15px" id="2"]
Docking Station 1 is a one room Tent that connects to your Model Y and was designed for easy 10-12 minute setup and takedown, and is fairly lightweight at (23lbs) Poles for frames are 3/4 inch (20mm) diameter aluminum, which is strong, lightweight, and attractive. The sleeve that connects the tent to your Tesla is designed to keep water and bugs out by utilizing rubber coated magnets to avoid scratching, and an elastic cord. No securing straps are required over the roof or attached to the wheels. Sleeping space: 8x9 feet. Tent Includes a 40000mAh power bank with one 32 foot usb string lights for hanging from the awning or lighting the camp ground area. Light string has an in line on/off/stepless dimming switch. Light string is water proof IP65. Power Bank is located inside the tent with zippered wire port to the outside of the tent to run the light string up to the awning or lighting of the space around your tent. [spacer height="15px" id="2"]
The tent is easy and fast to set up, as fabric is pre-attached to the support poles, at the factory. [spacer height="15px" id="2"]
Docking Station 2 is a two room tent with an open floor plan which provides additional features, such as a hands-free “Walk-Through” magnetic door which automatically closes behind you, as you pass through. You could likely train your dog to use this door. At night for privacy, or to keep rain out, there is a zippered curtain attached to the inside of the magnetic door. The 2nd entry way room, the "lobby" provides space for camping gear and even larger items such as mountain bikes or paddle boards. The lobby provides a place to remove your shoes before entering the main sleeping area. The lobby also includes a clothes line. [spacer height="15px" id="2"]
A 7 x 11 foot awning provides 7x9 foot area of useable ground space) is included on Docking Station I and II, so you and your friends can sit outdoors. The included USB lighting package extends the outdoor enjoyment after dark, with friends and family.[spacer height="15px" id="2"]
Maybe you are a couple, meeting friends or family at your favorite camp site, who want to spend the night – Docking Station provides the space to do just that. Sleep 2 in your Tesla and 3-4 in the tent.[spacer height="15px" id="2"]
Docking Station 1
Docking Station 2
Same Docking Station I features above, plus:
“Travel Sleeper” Self-Inflating 5 inch thick Open Cell Foam Mattress for Model 3 – ETA March 1st
ForMyTesla.com is now offering a Self-Inflating Open Cell Foam Mattress (SIM) for Car Camping and Road Trips. [spacer height="15px" id="2"]The "Travel Sleeper SIM Mattress is designed specifically to fit the shape of Model Y's trunk, but can also be used in X, S and 3; sleeps two, and is perfect for drivers looking for a very comfortable and portable mattress. When deflating for 6 minutes with included Air Pump & rolling up, the SIM will fit into the Frunk or Sub-Trunk of Model Y for convenient storage and transport. However, for many, rolling up the SIM into its smallest dimensions is too difficult. In that case I suggest deflating the SIM for 6 minutes with the included air pump then with the SIM flat on the floor, roll up and secure with included straps. See Inflation/Deflation Instructions link on this page. At 44x14 inches the stuff sack takes up very little space in your rear main trunk. In either roll up procedure you can use your stuff sack bag which includes a pouch to store the air pump. [spacer height="15px" id="2"]
Demonstration Video from Bearded Tesla Guy on YouTube https://www.youtube.com/watch?v=qZIZGSjETEs&t=634s Demonstration Video from car camper Bryan Hauer: https://youtu.be/MmX8OyScBZ8 Video clip shows the SIM inside Model Y self-inflating: https://youtu.be/rVA0ajEU3U8[spacer height="15px" id="2"]
The "Travel Sleeper" SIM mattress is a hybrid, utilizing both open cell foam and air to create a very comfortable, "firmness adjustable" mattress that is 5 inches thick. The Travel Sleeper SIM Inflates by itself without need of an electric pump to 85% capacity. If desired, extra air can be added to increase firmness using the included cordless, rechargeable electric pump. It takes about 2-3 minutes for the mattress to self inflate to 85% capacity, with no pump, and 4 minutes to deflate with the assistance of the provided portable air pump. After deflation the SIM can be rolled up for transport storage. [spacer height="15px" id="2"]
This mattress can be used in-car, in-tent and as a home guest bed.[spacer height="15px" id="2"]
Inflation and Deflation Instructions: https://www.formytesla.com/sim-inflation-and-deflation/[spacer height= "15px" id="2"] The Travel Sleeper Self-inflating Mattress (SIM) may fit other Hatchback SUVs, CUVs and Minivans. See Mattress dimensions here: https://www.formytesla.com/wp-content/uploads/2022/06/SIM-Dimensions-in-inches.jpg [spacer height="15px" id="2"]Privacy Window Covers: (Click on "Go to Site") Window covers for camping privacy: https://amzn.to/3rGtas9 Windshield cover for camping privacy: https://amzn.to/3JhJwND Sunroof Cover for camping privacy: https://amzn.to/3BtJ3FL [spacer height="15px" id="2"]StorageTip: To maximize the lifespan of your self-inflating mattress, store inflated, with 4 valves open, under your home bed or on edge in a closet or your garage. If your mattress is not stored fully inflated, the foam or cells inside it may become crushed, which could slow re-inflation.[spacer height="15px" id="2"] https://www.youtube.com/watch?v=Q-6caU7XlNg&t=123s[spacer height="15px" id="2"] Inflated size: 77" long, 47" wide at the shoulders, 38" at the foot of the mattress, and is 5" thick. Sleeps 2 ( Mummy shape, see Product Gallery Images under main thumb) 4 valves for inflation and deflation. Travel Sleeper rolled up inside the stuff sack bag: 24x13x13 inches or an easier roll up without folding in half lengthwise 44x14 inside stuff sack. Stuff sack has a pouch to store the air pump. Weight: 12lbs. Colors: Light Grey for top and sides, with Dark Gray bottom. Top and Sides Fabric: 50D polyester elastic, TPU Non-Toxic Silky Smooth, and water proof. Bottom Fabric: 75D Polyester, TPU Carry Bag (Stuff Sack) has hand carry straps for storage and portability.[spacer height="15px" id="2"]
[spacer height="15px" id="2"]Adding air for a very firm mattress and to assist deflation, the included cordless air pump is very useful. [spacer height="15px" id="2"]
Infrequent need to re-charge Customer writes: "After 5 cycles of inflation/deflation, the battery indicator hadn’t dropped below 3/4 capacity. Plenty of juice on a full charge."
[spacer height="15px" id="2"]
Customer Testimonial:
"I've tried several different types of air mattresses that were meant for my Model Y, but all were too thin and very uncomfortable - especially considering my bad back. Thanks to the Bearded Tesla Guy on YouTube, I discovered this Travel Sleeper Mattress. I thought this will be my last attempt to try a new mattress to camp in my Tesla. I couldn't believe that I actually slept on this for 3 nights in a row on my living room floor. It was so comfortable! At 5" thick the Travel Sleeper mattress from ForMyTesla is a best kept secret, and glad I found it. It's portable and easy to store. Thank you BTG and ForMyTesla. I'm a happy camper now. Sincerely, Beth"[spacer height="15px" id="2"]
Optional Purchases:
Travel Size Pillows with White Pillowcases:
(2) Small Travel Size Pillows each 14″ x 19″
Down Alternative insert 100% Polyester fill (12oz) with White Cotton shell.
You will enjoy the soft and sumptuous hypoallergenic alternative to Down.
Price: $60.00 for 2 pillows with Pillow Cases, includes shipping to lower 48.[spacer height="15px" id="2"]
Fitted Bamboo Sheets Set: includes 1 Fitted Bottom Sheet with 2 "Good-Night Dear" side pockets to store such things as glasses, phone, remotes, small flashlight etc, just before going to sleep + 1 Top Sheet + 2 Pillow Cases. Bamboo is cooling and moisture-wicking. Bamboo fabric is very breathable.
Bamboo Sheets Set Price: $85.00 which includes shipping to continental 48 states.
[spacer height="15px" id="2"]
SIM Price: $325.00 FREE shipping to the lower 48 states.
IL residents subject to 10% sales tax[spacer height="15px" id="2"]
Email Jerry for shipping costs to Alaska, Hawaii, and Puerto Rico, and countries outside the USA: info@ForMyTesla.com[spacer height="15px" id="2"]
On Back Order till March 1st. Order now to be placed into queue. No charge till it can be shipped.
[spacer height="15px" id="2"]
“Travel Sleeper” Self-Inflating 5 inch thick Open Cell Foam Mattress for Road Trips and Car Camping. ETA March 1st
ForMyTesla.com is now offering a Self-Inflating Open Cell Foam Mattress (SIM) for Car Camping and Road Trips. [spacer height="15px" id="2"]The "Travel Sleeper SIM Mattress is designed specifically to fit the shape of Model Y's trunk, but can also be used in X, S and 3; sleeps two, and is perfect for drivers looking for a very comfortable and portable mattress. When deflating for 6 minutes with included Air Pump & rolling up, the SIM will fit into the Frunk or Sub-Trunk of Model Y for convenient storage and transport. However, for many, rolling up the SIM into its smallest dimensions is too difficult. In that case I suggest deflating the SIM for 6 minutes with the included air pump then with the SIM flat on the floor, roll up and secure with included straps. See Inflation/Deflation Instructions link on this page. At 44x14 inches the stuff sack takes up very little space in your rear main trunk. In either roll up procedure you can use your stuff sack bag which includes a pouch to store the included air pump. [spacer height="15px" id="2"]
Demonstration Video from Bearded Tesla Guy on YouTube https://www.youtube.com/watch?v=qZIZGSjETEs&t=634s Demonstration Video from car camper Bryan Hauer: https://youtu.be/MmX8OyScBZ8 Video clip shows the SIM inside Model Y self-inflating: https://youtu.be/rVA0ajEU3U8[spacer height="15px" id="2"]
The "Travel Sleeper" SIM mattress is a hybrid, utilizing both open cell foam and air to create a very comfortable, "firmness adjustable" mattress that is 5 inches thick. The Travel Sleeper SIM Inflates by itself without need of an electric pump to 85% capacity. If desired, extra air can be added to increase firmness using the included cordless, rechargeable electric pump. It takes about 2-3 minutes for the mattress to self inflate to 85% capacity, with no pump, and 4 minutes to deflate with the assistance of the provided portable air pump. After deflation the SIM can be rolled up for transport storage. [spacer height="15px" id="2"]
This mattress can be used in-car, in-tent and as a home guest bed.[spacer height="15px" id="2"]
Inflation and Deflation Instructions: https://www.formytesla.com/sim-inflation-and-deflation/[spacer height= "15px" id="2"] The Travel Sleeper Self-inflating Mattress (SIM) may fit other Hatchback SUVs, CUVs and Minivans. See Mattress dimensions here: https://www.formytesla.com/wp-content/uploads/2022/06/SIM-Dimensions-in-inches.jpg [spacer height="15px" id="2"]Privacy Window Covers: (Click on "Go to Site") Window covers for camping privacy: https://amzn.to/3rGtas9 Windshield cover for camping privacy: https://amzn.to/3JhJwND Sunroof Cover for camping privacy: https://amzn.to/3BtJ3FL [spacer height="15px" id="2"]StorageTip: To maximize the lifespan of your self-inflating mattress, store inflated, with 4 valves open, under your home bed or on edge in a closet or your garage. If your mattress is not stored fully inflated, the foam or cells inside it may become crushed, which could slow re-inflation.[spacer height="15px" id="2"] https://www.youtube.com/watch?v=Q-6caU7XlNg&t=123s[spacer height="15px" id="2"] Inflated size: 77" long, 47" wide at the shoulders, 38" at the foot of the mattress, and is 5" thick. Sleeps 2 ( Mummy shape, see Product Gallery Images under main thumb) 4 valves for inflation and deflation. Travel Sleeper rolled up inside the stuff sack bag: 24x13x13 inches or an easier roll up without folding in half lengthwise 44x14 inside stuff sack. Stuff sack has a pouch to store the air pump. Weight: 12lbs. Colors: Light Grey for top and sides, with Dark Gray bottom. Top and Sides Fabric: 50D polyester elastic, TPU Non-Toxic Silky Smooth, and water proof. Bottom Fabric: 75D Polyester, TPU Carry Bag (Stuff Sack) has hand carry straps for storage and portability.[spacer height="15px" id="2"]
[spacer height="15px" id="2"]Adding air for a very firm mattress and to assist deflation, the included cordless air pump is very useful. [spacer height="15px" id="2"]
Infrequent need to re-charge Customer writes: "After 5 cycles of inflation/deflation, the battery indicator hadn’t dropped below 3/4 capacity. Plenty of juice on a full charge."
[spacer height="15px" id="2"]
Customer Testimonial:
"I've tried several different types of air mattresses that were meant for my Model Y, but all were too thin and very uncomfortable - especially considering my bad back. Thanks to the Bearded Tesla Guy on YouTube, I discovered this Travel Sleeper Mattress. I thought this will be my last attempt to try a new mattress to camp in my Tesla. I couldn't believe that I actually slept on this for 3 nights in a row on my living room floor. It was so comfortable! At 5" thick the Travel Sleeper mattress from ForMyTesla is a best kept secret, and glad I found it. It's portable and easy to store. Thank you BTG and ForMyTesla. I'm a happy camper now. Sincerely, Beth"[spacer height="15px" id="2"]
Optional Purchases:
Travel Size Pillows with White Pillowcases:
(2) Small Travel Size Pillows each 14″ x 19″
Down Alternative insert 100% Polyester fill (12oz) with White Cotton shell.
You will enjoy the soft and sumptuous hypoallergenic alternative to Down.
Price: $60.00 for 2 pillows with Pillow Cases, includes shipping to lower 48.[spacer height="15px" id="2"]
Fitted Bamboo Sheets Set: includes 1 Fitted Bottom Sheet with 2 "Good-Night Dear" side pockets to store such things as glasses, phone, remotes, small flashlight etc, just before going to sleep + 1 Top Sheet + 2 Pillow Cases. Bamboo is cooling and moisture-wicking. Bamboo fabric is very breathable.
Bamboo Sheets Set Price: $85.00 which includes shipping to continental 48 states.
[spacer height="15px" id="2"]
SIM Price: $325.00 FREE shipping to the lower 48 states.
IL residents subject to 10% sales tax[spacer height="15px" id="2"]
Email Jerry for shipping costs to Alaska, Hawaii, and Puerto Rico, and countries outside the USA: info@ForMyTesla.com[spacer height="15px" id="2"]
On Back Order till March 1st. Order now to be placed into queue. No charge till it can be shipped.
[spacer height="15px" id="2"]
“Travel Sleeper” Self-Inflating Open Cell Foam Mattress for Car Camping, Tent, and In-Home use. ETA March 1st
ForMyTesla.com is now offering a Self-Inflating Open Cell Foam Mattress (SIM) for Car Camping and Road Trips. [spacer height="15px" id="2"]The "Travel Sleeper SIM Mattress is designed specifically to fit the shape of Model Y's trunk, but can also be used in X, S and 3; sleeps two, and is perfect for drivers looking for a very comfortable and portable mattress. When deflating for 6 minutes with included Air Pump & rolling up, the SIM will fit into the Frunk or Sub-Trunk of Model Y for convenient storage and transport. However, for many, rolling up the SIM into its smallest dimensions is too difficult. In that case I suggest deflating the SIM for 6 minutes with the included air pump then with the SIM flat on the floor, roll up and secure with included straps. See Inflation/Deflation Instructions link on this page. At 44x14 inches the stuff sack takes up very little space in your rear main trunk. In either roll up procedure you can use your stuff sack bag which includes a pouch to store the air pump. [spacer height="15px" id="2"]
Demonstration Video from Bearded Tesla Guy on YouTube https://www.youtube.com/watch?v=qZIZGSjETEs&t=634s Demonstration Video from car camper Bryan Hauer: https://youtu.be/MmX8OyScBZ8 Video clip shows the SIM inside Model Y self-inflating: https://youtu.be/rVA0ajEU3U8[spacer height="15px" id="2"]
The "Travel Sleeper" SIM mattress is a hybrid, utilizing both open cell foam and air to create a very comfortable, "firmness adjustable" mattress that is 5 inches thick. The Travel Sleeper SIM Inflates by itself without need of an electric pump to 85% capacity. If desired, extra air can be added to increase firmness using the included cordless, rechargeable electric pump. It takes about 2-3 minutes for the mattress to self inflate to 85% capacity, with no pump, and 4 minutes to deflate with the assistance of the provided portable air pump. After deflation the SIM can be rolled up for transport storage. [spacer height="15px" id="2"]
This mattress can be used in-car, in-tent and as a home guest bed.[spacer height="15px" id="2"]
Inflation and Deflation Instructions: https://www.formytesla.com/sim-inflation-and-deflation/[spacer height= "15px" id="2"] The Travel Sleeper Self-inflating Mattress (SIM) may fit other Hatchback SUVs, CUVs and Minivans. See Mattress dimensions here: https://www.formytesla.com/wp-content/uploads/2022/06/SIM-Dimensions-in-inches.jpg [spacer height="15px" id="2"]Privacy Window Covers: (Click on "Go to Site") Window covers for camping privacy: https://amzn.to/3rGtas9 Windshield cover for camping privacy: https://amzn.to/3JhJwND Sunroof Cover for camping privacy: https://amzn.to/3BtJ3FL [spacer height="15px" id="2"]StorageTip: To maximize the lifespan of your self-inflating mattress, store inflated, with 4 valves open, under your home bed or on edge in a closet or your garage. If your mattress is not stored fully inflated, the foam or cells inside it may become crushed, which could slow re-inflation.[spacer height="15px" id="2"] https://www.youtube.com/watch?v=Q-6caU7XlNg&t=123s[spacer height="15px" id="2"] Inflated size: 77" long, 47" wide at the shoulders, 38" at the foot of the mattress, and is 5" thick. Sleeps 2 ( Mummy shape, see Product Gallery Images under main thumb) 4 valves for inflation and deflation. Travel Sleeper rolled up inside the stuff sack bag: 24x13x13 inches or an easier roll up without folding in half lengthwise 44x14 inside stuff sack. Stuff sack has a pouch to store the air pump. Weight: 12lbs. Colors: Light Grey for top and sides, with Dark Gray bottom. Top and Sides Fabric: 50D polyester elastic, TPU Non-Toxic Silky Smooth, and water proof. Bottom Fabric: 75D Polyester, TPU Carry Bag (Stuff Sack) has hand carry straps for storage and portability.[spacer height="15px" id="2"]
[spacer height="15px" id="2"]Adding air for a very firm mattress and to assist deflation, the included cordless air pump is very useful. [spacer height="15px" id="2"]
Infrequent need to re-charge Customer writes: "After 5 cycles of inflation/deflation, the battery indicator hadn’t dropped below 3/4 capacity. Plenty of juice on a full charge."
[spacer height="15px" id="2"]
Customer Testimonial:
"I've tried several different types of air mattresses that were meant for my Model Y, but all were too thin and very uncomfortable - especially considering my bad back. Thanks to the Bearded Tesla Guy on YouTube, I discovered this Travel Sleeper Mattress. I thought this will be my last attempt to try a new mattress to camp in my Tesla. I couldn't believe that I actually slept on this for 3 nights in a row on my living room floor. It was so comfortable! At 5" thick the Travel Sleeper mattress from ForMyTesla is a best kept secret, and glad I found it. It's portable and easy to store. Thank you BTG and ForMyTesla. I'm a happy camper now. Sincerely, Beth"[spacer height="15px" id="2"]
Optional Purchases:
Travel Size Pillows with White Pillowcases:
(2) Small Travel Size Pillows each 14″ x 19″
Down Alternative insert 100% Polyester fill (12oz) with White Cotton shell.
You will enjoy the soft and sumptuous hypoallergenic alternative to Down.
Price: $60.00 for 2 pillows with Pillow Cases, includes shipping to lower 48.[spacer height="15px" id="2"]
Fitted Bamboo Sheets Set: includes 1 Fitted Bottom Sheet with 2 "Good-Night Dear" side pockets to store such things as glasses, phone, remotes, small flashlight etc, just before going to sleep + 1 Top Sheet + 2 Pillow Cases. Bamboo is cooling and moisture-wicking. Bamboo fabric is very breathable.
Bamboo Sheets Set Price: $85.00 which includes shipping to continental 48 states.
[spacer height="15px" id="2"]
SIM Price: $325.00 FREE shipping to the lower 48 states.
IL residents subject to 10% sales tax[spacer height="15px" id="2"]
Email Jerry for shipping costs to Alaska, Hawaii, and Puerto Rico, and countries outside the USA: info@ForMyTesla.com[spacer height="15px" id="2"]
On Back Order till March 1st. Order now to be placed into queue. No charge till it can be shipped.
[spacer height="15px" id="2"]
“Travel Sleeper”, Self-Inflating 5″ thick Open Cell Foam Mattress, Comfortable and Portable for Road Trips and Car Camping. ETA March 1st
ForMyTesla.com is now offering a Self-Inflating Open Cell Foam Mattress (SIM) for Car Camping and Road Trips. [spacer height="15px" id="2"]The "Travel Sleeper SIM Mattress is designed specifically to fit the shape of Model Y's trunk, but can also be used in X, S and 3; sleeps two, and is perfect for drivers looking for a very comfortable and portable mattress. When deflating for 6 minutes with included Air Pump & rolling up, the SIM will fit into the Frunk or Sub-Trunk of Model Y for convenient storage and transport. However, for many, rolling up the SIM into its smallest dimensions is too difficult. In that case I suggest deflating the SIM for 6 minutes with the included air pump then with the SIM flat on the floor, roll up and secure with included straps. See Inflation/Deflation Instructions link on this page. At 44x14 inches the stuff sack takes up very little space in your rear main trunk. In either roll up procedure you can use your stuff sack bag which includes a pouch to store the air pump. [spacer height="15px" id="2"]
Demonstration Video from Bearded Tesla Guy on YouTube https://www.youtube.com/watch?v=qZIZGSjETEs&t=634s Demonstration Video from car camper Bryan Hauer: https://youtu.be/MmX8OyScBZ8 Video clip shows the SIM inside Model Y self-inflating: https://youtu.be/rVA0ajEU3U8[spacer height="15px" id="2"]
The "Travel Sleeper" SIM mattress is a hybrid, utilizing both open cell foam and air to create a very comfortable, "firmness adjustable" mattress that is 5 inches thick. The Travel Sleeper SIM Inflates by itself without need of an electric pump to 85% capacity. If desired, extra air can be added to increase firmness using the included cordless, rechargeable electric pump. It takes about 2-3 minutes for the mattress to self inflate to 85% capacity, with no pump, and 4 minutes to deflate with the assistance of the provided portable air pump. After deflation the SIM can be rolled up for transport storage. [spacer height="15px" id="2"]
This mattress can be used in-car, in-tent and as a home guest bed.[spacer height="15px" id="2"]
Inflation and Deflation Instructions: https://www.formytesla.com/sim-inflation-and-deflation/[spacer height= "15px" id="2"] The Travel Sleeper Self-inflating Mattress (SIM) may fit other Hatchback SUVs, CUVs and Minivans. See Mattress dimensions here: https://www.formytesla.com/wp-content/uploads/2022/06/SIM-Dimensions-in-inches.jpg [spacer height="15px" id="2"]Privacy Window Covers: (Click on "Go to Site") Window covers for camping privacy: https://amzn.to/3rGtas9 Windshield cover for camping privacy: https://amzn.to/3JhJwND Sunroof Cover for camping privacy: https://amzn.to/3BtJ3FL [spacer height="15px" id="2"]StorageTip: To maximize the lifespan of your self-inflating mattress, store inflated, with 4 valves open, under your home bed or on edge in a closet or your garage. If your mattress is not stored fully inflated, the foam or cells inside it may become crushed, which could slow re-inflation.[spacer height="15px" id="2"] https://www.youtube.com/watch?v=Q-6caU7XlNg&t=123s[spacer height="15px" id="2"] Inflated size: 77" long, 47" wide at the shoulders, 38" at the foot of the mattress, and is 5" thick. Sleeps 2 ( Mummy shape, see Product Gallery Images under main thumb) 4 valves for inflation and deflation. Travel Sleeper rolled up inside the stuff sack bag: 24x13x13 inches or an easier roll up without folding in half lengthwise 44x14 inside stuff sack. Stuff sack has a pouch to store the air pump. Weight: 12lbs. Colors: Light Grey for top and sides, with Dark Gray bottom. Top and Sides Fabric: 50D polyester elastic, TPU Non-Toxic Silky Smooth, and water proof. Bottom Fabric: 75D Polyester, TPU Carry Bag (Stuff Sack) has hand carry straps for storage and portability.[spacer height="15px" id="2"]
[spacer height="15px" id="2"]Adding air for a very firm mattress and to assist deflation, the included cordless air pump is very useful. [spacer height="15px" id="2"]
Infrequent need to re-charge Customer writes: "After 5 cycles of inflation/deflation, the battery indicator hadn’t dropped below 3/4 capacity. Plenty of juice on a full charge."
[spacer height="15px" id="2"]
Customer Testimonial:
"I've tried several different types of air mattresses that were meant for my Model Y, but all were too thin and very uncomfortable - especially considering my bad back. Thanks to the Bearded Tesla Guy on YouTube, I discovered this Travel Sleeper Mattress. I thought this will be my last attempt to try a new mattress to camp in my Tesla. I couldn't believe that I actually slept on this for 3 nights in a row on my living room floor. It was so comfortable! At 5" thick the Travel Sleeper mattress from ForMyTesla is a best kept secret, and glad I found it. It's portable and easy to store. Thank you BTG and ForMyTesla. I'm a happy camper now. Sincerely, Beth"[spacer height="15px" id="2"]
Optional Purchases:
Travel Size Pillows with White Pillowcases:
(2) Small Travel Size Pillows each 14″ x 19″
Down Alternative insert 100% Polyester fill (12oz) with White Cotton shell.
You will enjoy the soft and sumptuous hypoallergenic alternative to Down.
Price: $60.00 for 2 pillows with Pillow Cases, includes shipping to lower 48.[spacer height="15px" id="2"]
Fitted Bamboo Sheets Set: includes 1 Fitted Bottom Sheet with 2 "Good-Night Dear" side pockets to store such things as glasses, phone, remotes, small flashlight etc, just before going to sleep + 1 Top Sheet + 2 Pillow Cases. Bamboo is cooling and moisture-wicking. Bamboo fabric is very breathable.
Bamboo Sheets Set Price: $85.00 which includes shipping to continental 48 states.
[spacer height="15px" id="2"]
SIM Price: $325.00 FREE shipping to the lower 48 states.
IL residents subject to 10% sales tax[spacer height="15px" id="2"]
Email Jerry for shipping costs to Alaska, Hawaii, and Puerto Rico, and countries outside the USA: info@ForMyTesla.com[spacer height="15px" id="2"]
On Back Order. Order now to be placed into queue. No charge till it can be shipped.
[spacer height="15px" id="2"]
#BRC-46 “Streak Free” Glass Cleaner
This glass cleaner may be the best product
you have ever tried to clean glass, without
streaking. Does not contain Amonia.
Wipe on with one cloth, polish with a second cloth
works extremely well.
19 oz. Aerosol
2 versions of the Docking Station Tent will be made. DS-1 is a one room tent and DS-2 is a two room tent with a store room for your gear and a Walk-through Magnetic Door. Both DS-1 and DS-2 attach to your Tesla. Sleeps up to 4 adults
This spacious Tent is perfect for Road Trips and weekend camping get-a-ways.[spacer height="15px" id="2"]
2 versions of the Docking Station Tent will be made. DS-1 is a one room tent, and DS-2 is a 2 room tent with walk-through magnetic door + Store room for your gear. Sleeps up to 4 Adults Both DS-1 and DS-2 connect to your Tesla.
This spacious Tent is perfect for Road Trips and weekend camping get-a-ways.[spacer height="15px" id="2"]]
You may place your order now as a reservation. No charge will be made until the tent can be shipped in July or August.
Docking Station Tent was designed to be easy set up and take down, and to be fairly light weight for its size.(25lbs) Poles for frame are 3/4 inch diameter aluminum, which are strong, light weight and attractive.[spacer height="15px" id="2"]
Because of the "Walk-Through" door moving your camping gear in and out of the tent is very fast and convenient, with just a few steps from the rear of your Tesla, or other vehicle, to the Magnetic Door entryway.[spacer height="15px" id="2"]
While camping, the "Walk-Through" - no zipper door- makes it convenient to enter and exit hands-free. The curtains of the door will close behind you to help keep the bugs out. You could likely train your dog to use this door. At night for privacy, or to keep rain out, there is a zippered curtain attached to the inside of the magnetic door.[spacer height="15px" id="2"] Due to the "open concept" floor plan, you have the flexibility to store larger items out of sight in the entryway, such as mountain bikes or surfboards...and the entryway provides a space to remove your shoes, and store your camping gear.[spacer height="15px" id="2"]A 7 x 9 foot awning with poles and guy ropes are included, so you and friends can sit outdoors. The awning can be easily set-up on any side of the tent.[spacer height="15px" id="2"]
Maybe you are a couple, meeting friends and family and want to camp together - Docking Station provides the space to do just that. Sleep 2 in your Tesla and 3-4 in the tent. [spacer height="15px" id="2"]
3D MAXpider All-Weather Custom Fit Floor Liners For Model S
Great looking!
MAXpider floor liners provide an attractive style not found in other all-weather mats and liners. MAXpider liners enhance the look of your Model 3’s interior, while at the same time, provide peace of mind knowing that when spills happen, and dirt, snow, water and salt are tracked onto your Model 3 floor – no damage is done.
Unlike traditional floor liners that have an industrial hard plastic look;
3D MAXpider textured all-weather floor liners have a “carpet like” appearance and are pleasing to the eye. Because of the textured finish your feet rest on an anti-slip surface – not slick like other floor liners, which is especially advantageous when your shoes are wet.[spacer height="15px" id="2"]
Exact Fit – Protects Flooring – Easy to Clean
MAXpider three dimensional floor liners fit the contours of your model 3 exactly for a professional looking fit. Edges are raised to provide maximum coverage and protection for your Model 3.
Spills are trapped, and can be easily rinsed off with water. Since MAXpider liners are not heavy they are easier to remove for cleaning than other brands of floor liners.[spacer height="15px" id="2"]
3 Layer Purposeful Construction:
Top layer is made from Thermoplastic textured waterproof Rubber.
Middle XPE layer reduces foot fatigue & provides a barrier to road noise.
Bottom layer material is slip resistant to keep liners in place without sliding around. (No Grommets or Hooks needed for Driver’s Side Liner.)[spacer height="15px" id="2"]
MAXpider Floor Liners are non-toxic and odorless.[spacer height="15px" id="2"]
Testimonial:
“Received the MAXpiders this morning. They are simple, modern with a quiet elegance…a very sleek, luxurious suede look to them and are super lightweight. No other car floor mats can even come close. By comparison, WeatherTech liners look harsh, industrial and don’t fit the Tesla look.” — Matt B[spacer height="15px" id="2"]
Excellent Video Review of MAXpider Liners for Model 3:
Video illustrates the features, advantages and benefits of MAXpider Floor liners, but doesn't show the fitment for Model S.
[kad_youtube url="https://www.youtube.com/watch?v=0G3FjpADXJk&feature=youtu.be" width=300 height=165 ]
[spacer height="15px" id="2"]
Color: Black, is standard color. email Jerry at info@ForMyTesla.com if you want Tan or Grey or Indicate in the Notes section of the order form your color choice which will be verified.
Free Shipping within the Continental USA[spacer height="15px" id="2"]
Note:
Some drivers do not like the look of the “3D Emblem” found on MAXpider floor liners.
You can easily apply a vinyl wrap in matte black to change to a subtle looking 3D emblem. See this link for details:
Model 3 3D MAXpider Mat Logo Decal
[spacer height="15px" id="2"]
When ordering MAXpider for 2018 Model S, email Jerry at info@ForMyTesla.com for details regarding: "Late" if the distance from the back of your center console to the rear seat is 17.5 inches. Order "Early" if that distance is 19.5 inches. Tesla changed size of center console depth in 2018.[spacer height="15px" id="2"]
Custom floor mats for Tesla Model S
German Velour Carpet
Driver's Side Heel Pad
Vinyl Binding Border around mats
Non-slip rubber spiked backing, except from Frunk and Trunk mats.
Custom embroidered graphics in one or more colors.
Any graphic that can be digitized can be embroidered
on floor mats for Model S. Your business logo, Initials,
Family names etc.
Custom floor mats for Tesla Model Y
German Velour Carpet
Driver's Side Heel Pad
Vinyl Binding Border around mats, several colors to choose from
Non-slip rubber spiked backing, except from Frunk and Trunk mats.
Custom embroidered graphics in one or more colors.
Any graphic that can be digitized can be embroidered
on floor mats for Model Y. Your business logo, Initials,
Family names etc.
Call Jerry to discuss options at 224 676 1484
Pricing is based on the number of mat locations and the number of graphics to be embroidered.
Plus shipping
MAXpider “Elegant” Carpeted Floor Liners for Model 3
MAXpider “Elegant” carpeted floor liners are rich and luxurious looking which will enhance the beauty and enjoyment of your Model 3. Raised edges and precise laser measuring means that “Elegant” floor liners are far better than a flat mat, and … Continued
MAXpider “Elegant” Carpeted Floor Liners for Model S
MAXpider “Elegant” carpeted floor liners are rich and luxurious looking which will enhance the beauty and enjoyment of your Model S. Raised edges and precise laser measuring means that “Elegant” floor liners are far better than a flat mat, and … Continued
MAXpider “Elegant” Carpeted Floor Liners for Model X, Rows 1, 2 & 3
MAXpider “Elegant” carpeted floor liners are rich and luxurious looking which will enhance the beauty and enjoyment of your Model X. Raised edges and precise laser measuring means that “Elegant” floor liners are far better than a flat mat, and … Continued
MAXpider All-Weather Custom Fit Floor Liners for Model 3
Great looking!
MAXpider floor liners provide an attractive style not found in other all-weather mats and liners. MAXpider liners enhance the look of your Model 3's interior, while at the same time, provide peace of mind knowing that when spills happen, and dirt, snow, water and salt are tracked onto your Model 3 floor - no damage is done.[spacer height="15px" id="2"]
Unlike traditional floor liners that have an industrial hard plastic look;
3D MAXpider textured all-weather floor liners have a "carpet like" appearance and are pleasing to the eye. Because of the textured finish your feet rest on an anti-slip surface – not slick like other floor liners, which is especially advantageous when your shoes are wet. [spacer height="15px" id="2"]
Exact Fit - Protects Flooring - Easy to Clean.
MAXpider three dimensional floor liners fit the contours of your model 3 exactly for a professional looking fit. Edges are raised to provide maximum coverage and protection for your Model 3.
Spills are trapped, and can be easily rinsed off with water. Since MAXpider liners are not heavy they are easier to remove for cleaning than other brands of floor liners.[spacer height="15px" id="2"]
3 Layer Purposeful Construction:
Top layer is made from Thermoplastic textured waterproof Rubber.
Middle XPE layer reduces foot fatigue & provides a barrier to road noise.
Bottom layer material is slip resistant to keep liners in place without sliding around. (No Grommets or Hooks needed for Driver's Side Liner.)[spacer height="15px" id="2"]
MAXpider Floor Liners are non-toxic and odorless.[spacer height="15px" id="2"]
Testimonial:
"Received the MAXpiders this morning. They are simple and modern with a quiet elegance...a very sleek, luxurious suede look to them and are super lightweight. No other car floor mats can even come close. By comparison, WeatherTech liners look harsh, industrial and aren't compatible with the Tesla look." — Matt B[spacer height="15px" id="2"]
Excellent Video Review of MAXpider Liners for Model 3:
[kad_youtube url="https://www.youtube.com/watch?v=0G3FjpADXJk&feature=youtu.be" width=300 height=165 ]
[spacer height="15px" id="2"]
Color: Black
Note:
Some drivers do not like the look of the "3D Emblem" found on MAXpider floor liners.
[spacer height="15px" id="2"]
You can easily apply a vinyl wrap in matte black to change the look to a subtle looking 3D emblem. See this link for details:
Model 3 3D MAXpider Mat Logo Decal
[spacer height="15px" id="2"]
Installation: Remove factory floor mats before installing MAXpider Floor Liners. For rear seat floor liner, face the straight edge towards the 2nd row seat.[spacer height="15px" id="2"]
PRICING MAXpider Floor Liners, Model 3:
Prices include FREE SHIPPING to Continental USA via FedEx ground from California[spacer height="15px" id="2"]
$129.59 Front Seats Floor liners 2018-2019 0041
$129.60 Front Seats Floor Liners for 2020-2022 0261
Revised Fitment Passenger Seat Liner
-----------------------------------------------------------------------------------------------------------------------------------------------------
$194.28 Front + Rear Seats, Floor Liners for 2018-2019, 0040
$205.11 Front and Rear Seats Floor Liners for 2020-2022, 0260
$291.49 Elegant Carpeted Front and Rear Seats Floor liners for 2018-2019 0040 4709
-----------------------------------------------------------------------------------------------------------------------------------------------------
$97.19 Rear Trunk Upper Liner 004 2018 - July 2021
$109.79 Rear Trunk Upper Liner 041 August 2021-2022
$91.50 Rear Trunk Lower Sub-trunk Liner 015 2018-2022
-----------------------------------------------------------------------------------------------------------------------------------------------------
$91.49 FRUNK 2018-2020 Model 3s NO Heat Pump 006
$91.51 FRUNK 2021-2022 Frunk Liner for Model 3s With Heat Pump 022 [spacer height="15px" id="2"]
-----------------------------------------------------------------------------------------------------------------------------------------------------
$485.29 Complete set of 6 MAXpider Floor Liners for up to July 2021 Model 3 with Heat Pump
Front + Rear Seats Liners (3) 0260 + Frunk (1) 022 + Rear Trunk Upper (1) 004 + Rear Trunk Lower (1) 015[spacer height="15px" id="2"]
$498.12 Complete set of 6 MAXpider Floor Liners August 2021 - 2022 Front + Rear Seats Liners (3) 0260 + Frunk (1) 022 + Rear Trunk Upper (1) 041 + Rear Trunk Lower (1) 015
$75.00 will be added to the above prices for Shipments to Hawaii, Alaska and Canada[spacer height="15px" id="2"]
10% sales tax will be added to the above prices to customers in Illinois. [spacer height="15px" id="2"]
Note: Back Orders will be shipped in the order they were received.
MAXpider All-Weather Custom Fit Floor Liners for Model Y
_________________________________________________________________________________________
MAXpider All-Weather Floor Liners For Model X
Great looking!
MAXpider floor liners provide an attractive style not found in other all-weather mats and liners. MAXpider liners enhance the look of your Model X interior, while at the same time, provide peace of mind knowing that when spills happen, and dirt, snow, water and salt are tracked onto your Model 3 floor - no damage is done.[spacer height="15px" id="2"]
Unlike traditional floor liners that have an industrial hard plastic look;
3D MAXpider textured all-weather floor liners have a "carpet like" appearance and are pleasing to the eye. Because of the textured finish your feet rest on an anti-slip surface – not slick like other floor liners, which is especially advantageous when your shoes are wet. [spacer height="15px" id="2"]
Exact Fit - Protects Flooring - Easy to Clean.
MAXpider three dimensional floor liners fit the contours of your model X exactly for a professional looking fit. Edges are raised to provide maximum coverage and protection for your Model X.
Spills are trapped, and can be easily rinsed off with water. Since MAXpider liners are not heavy they are easier to remove for cleaning than other brands of floor liners.[spacer height="15px" id="2"]
3 Layer Purposeful Construction:
Top layer is made from Thermoplastic textured waterproof Rubber.
Middle XPE layer reduces foot fatigue & provides a barrier to road noise.
Bottom layer material is slip resistant to keep liners in place without sliding around. (No Grommets or Hooks needed for Driver's Side Liner.)[spacer height="15px" id="2"]
MAXpider Floor Liners are non-toxic and odorless.[spacer height="15px" id="2"]
Testimonial:
"Received the MAXpiders this morning. They are simple, modern with a quiet elegance...a very sleek, luxurious suede look to them and are super lightweight. No other car floor mats can even come close. By comparison, WeatherTech liners look harsh, industrial and don't fit the Tesla look." — Matt B[spacer height="15px" id="2"]
Video:
Excellent Review of MAXpider Liners:
(Illustrates the features, advantages and benefits of MAXpider floor liners, only fitment for Model 3 instead of Model X)
[kad_youtube url="https://www.youtube.com/watch?v=0G3FjpADXJk&feature=youtu.be" width=300 height=165 ]
[spacer height="15px" id="2"]
Free shipping within the lower 48 states
Contact for International shipping costs:
info@ForMyTesla.com or call 847 808 8609[spacer height="15px" id="2"]
Note:
MAXpider now offers floor liners for Tesla Model X, 6 seat configuration with console between rear seats. We can make custom carpeted floor mats for the "with console" model X. For 6 and 7 seat Model X, there is now a stowable rear trunk liner for use with 3rd row seat up or down, so Rear Trunk liner does not have to be removed. MAXpider does offer 2nd/3rd row liners for 2018-2020 fold flat 7 passenger seats.[spacer height="15px" id="2"]
You can easily apply a vinyl wrap in matte black to change to a subtle looking 3D emblem. See this link for details:
Model 3 3D MAXpider Mat Logo Decal
[spacer height="15px" id="2"]
Black is the default color. Contact Jerry at 224 676 1484 or email to: info@ForMyTesla.com to inquire about Gray or Tan Liners.
MAXpider Floor Liners For Chevy Bolt
Great looking!
MAXpider floor liners provide an attractive style not found in other all-weather mats and liners. MAXpider liners enhance the look of your Bolt's interior, while at the same time, provide peace of mind knowing that when spills happen, and dirt, snow, water and salt are tracked onto your Chevy Bolt floor – no damage is done.[spacer height="15px" id="2"]
Unlike traditional floor liners that have an industrial hard plastic look;
3D MAXpider textured all-weather floor liners have a “carpet like” appearance and are pleasing to the eye. Because of the textured finish your feet rest on an anti-slip surface – not slick like other floor liners, which is especially advantageous when your shoes are wet.[spacer height="15px" id="2"]
Exact Fit – Protects Flooring – Easy to Clean
MAXpider three dimensional floor liners fit the contours of your Bolt exactly for a professional looking fit. Edges are raised to provide maximum coverage and protection for your Chevy Bolt..
Spills are trapped, and can be easily rinsed off with water. Since MAXpider liners are not heavy they are easier to remove for cleaning than other brands of floor liners.[spacer height="15px" id="2"]
3 Layer Purposeful Construction:
Top layer is made from Thermoplastic textured waterproof Rubber.
Middle XPE layer reduces foot fatigue & provides a barrier to road noise.
Bottom layer material is slip resistant to keep liners in place without sliding around. [spacer height="15px" id="2"]
MAXpider Floor Liners are non-toxic and odorless.[spacer height="15px" id="2"]
Testimonial:
“Received the MAXpiders this morning. They are simple, modern with a quiet elegance…a very sleek, luxurious suede look to them and are super lightweight. No other car floor mats can even come close. By comparison, WeatherTech liners look harsh, industrial and don’t fit the Tesla look.” — Matt B[spacer height="15px" id="2"]
Excellent Video Review of MAXpider Liners for Model 3:
Video illustrates the features, advantages and benefits of MAXpider Floor liners, but doesn't show the fitment for Model S, X or Chevy Bolt.[spacer height="15px" id="2"]
[kad_youtube url="https://www.youtube.com/watch?v=0G3FjpADXJk&feature=youtu.be" width=300 height=165 ]
[spacer height="15px" id="2"]
Color: Black or Gray
Free Shipping within the Continental USA[spacer height="15px" id="2"]
Gray Front Seats Liners In Stock
Gray Front & Rear Seats MAXpider Floor Liners for Chevy Bolt In Stock
Black Liners In Stock
Back Orders placed will be charged, and put into queue. Back Orders are filled on a first in first out basis as inventory becomes available.
Note:
Some drivers do not like the look of the “3D Emblem” found on MAXpider floor liners.
You can easily apply a vinyl wrap in matte black to change to a subtle looking 3D emblem. Order Directly from EVwraps here:
https://evwraps.com/collections/model-3/products/model-3-3d-maxpider-mat-logo-decal
[spacer height="15px" id="2"]
Protect your TESLA from Rock Chips!
20% off Pre-cut PPF Use Coupon Code: ForMyTesla
DIY Pre-cut 3M Scotchgard Pro PPF Paint Protection Film Free Shipping/Tools/Video and 20% discount at Invisible Mask using coupon "ForMyTesla" Email Invisible Mask: sales@invisiblemask.com Call Ken to discuss at 866-927-5678 Temecula California
Sale!
$475.00
Read more
Retractable Sun Screen for Tesla Model Y Coming Soon
This retractable accordion style sun screen blocks unwanted excessive heat from passing through the glass roof of Model Y. Using the sun screen on very hot days helps control the temperature in the cabin and therefore reduces energy consumption for … Continued
Solo Sleeper 5 inches thick for For Model Y, Tent Use or as a Home Guest Bed. In Stock
At 29x77x5 inches, Solo Sleeper is just the right size to sleep one adult inside Teslas S,3,X and Y. It Self-inflates in about 2 minutes and is very comfortable. Because of the 5 inches of open cell foam inside the mattress you won't bottom out, and sleeps similar to your bed at home.[spacer height="15px" id="2"]Top and sides fabric is soft and smoooth 50 denier and bottom fabric is durable 75 denier. Solo Sleeper is washable.[spacer height="15px" id="2"]
Solo Sleeper also makes a nice home guest bed or use as a tent camping bed.[spacer height="15px" id="2"]
A cordless, rechargeable Air Pump is included to speed deflation along. Also used to add air for those who want a very firm mattress. Once deflated, Solo Sleeper Rolls up to fit inside your sub-trunk.[spacer height="15px" id="2"]
2 Valves are used for inflating and deflating the mattress.[spacer height="15px" id="2"]
Solo Sleeper weighs 8.8 pounds. Colors: top and sides are very light grey, bottom dark grey.[spacer height="15px" id="2"]
Price is $285.00 which includes a stuff sack bag and an Air Pump. Shipping is included to continental 48 states destinations..[spacer height="15px" id="2"]
Call for shipping cost to Hawaii, Alaska, Puerto Rico and countries outside the US 224 676 1484 Central Time,
or email to: info@ForMyTesla.com. Ask for Jerry[spacer height="15px" id="2"]
In Stock