Back to Car Care

#1010HT Nanoglass Ceramic Coating 3+ Years Durability


Ceramic Wet-Look Shine that lasts 3 or more years

with normal maintenance.

Use to protect Paint, Wheels, Glass, Lights, clear film wrapped areas and Plastic.

4oz. Spray Bottle



Product Description

NanoGlass is a Ceramic Polymer Sealant Coating that provides a beautiful very long lasting “wet-look” high gloss shine.

NanoGlass protects paint from acid rain, UV rays, Salt and pollutants.

The tremendous molecular bonding of NanoGlass provides maximum durability.

When properly maintained, washing your car when needed, and using NanoGlass Quick Detailer in between car washes; you can expect the shine to last 3 or more years.

NanoGlass makes it easy to maintain a high gloss.  NanoGlass has the consistency of water and there is no residue haze to buff off. Use it on any non-porous surface including painted or chrome wheels, headlights and tail lights.

Use NanoGlass on paint, glass, plastic, clear film wrap, and  metal trim – any non-porous surface.

NanoGlass has no harmful solvents and no bad smell.  It is easy to apply, and is Made in the USA by Duragloss.


First wash and dry your car. If you have road oil along your rocker panels and wheel wells, remove with Tar Remover or charcoal lighter fluid.For the very best results, after washing and drying your car, run your finger tips across your paint. If you can feel (and hear) specs of contamination, use clay bar with lubricant (such as Claybar +  clean soapy water as the lubricant) to remove contaminants such as paint overspray.  You can use a potato peeler to remove contaminants from the face of the claybar.IF you have Deep Scratches, Oxidation, Tree Sap, Road Film, Tar or Water spots, use Duragloss 652 Pre-Cleaner Buffing Compound with an orbital buffer.IF you have swirl marks and fine scratches, remove with Duragloss 671 Swirl Mark Remover using an orbital buffer (Flex brand is a great buffer) or Porter-Cable and polishing pad at medium speed.  If the polishing pad is not sufficient to remove swirls, then use a low cut buffing pad.IF you have Rock chips, call to discuss, or take your car to a pro detailing shop and ask them if they can be fixed.Next, deep clean your paint using Duragloss Squeaky Clean Surface Prep to remove previously applied wax or polish. (Note:  Do not apply Squeaky Clean on unpainted ABS or rubber bumpers or on textured plastic wheel well fender trim.) To remove any residue left behind after buffing Squeaky Clean and wiping away the residue, wipe your paint down with 70% or greater Isopropyl alcohol to completely remove any residue from using Squeaky Clean Prep.  This will help NanoGlassHT strongly adhere to your car’s clear coat.  After your paint is as clean, smooth and corrected as you can make it, you are ready to apply NanoGlassHT.Or, take your car to a Professional Detail shop to correct your paint issues, then apply NanoGlassHT yourself, or pay the shop to apply it.  If you have a new car, and don’t have swirl marks or scratches,  just prep the paint with “Squeaky Clean”, included in this kit, and apply NanoGlassHT in the shade.


NanoGlassHT is VOC (Volatile Organic Compounds) compliant and is safe to use, and very easy to apply, since it has the consistency of water.  On a cool surface, not in direct sunlight, simply spray NanoGlass onto the cotton side of an applicator pad, then wipe a thin even coat in a multi-directional manner ie clockwise, counter clockwise, back and forth, up and down, onto a 2×2 foot area until dry and the residue has evaporated, which takes about 20 seconds. DO NOT USE A BUFFING MACHINE. After you are finished applying NanoGlassHT onto a section at a time, (like hood, fender, door or trunk) inspect for streaks, and if you have steaks, hand buff with microfiber cloth to remove them.  If you wait longer to hand buff away streaks, they will be harder to remove.

After application of NanoGlassHT, your car can be parked in direct sunlight which will further bond NanoGlassHT to your paint.

A second coat of NanoGlassHT is not necessary but can be applied after 24 hours of first application to provide increased durability.


Maintain your high gloss finish by washing your car when needed with Duragloss 901 PH Neutral shampoo, and by using NanoGlass Quick Detailer #20113 after a car wash and dry, and in between car washes to remove light dust and bird droppings etc. The NanoGlass Quick Detailer cleans AND adds gloss with each use.  Wipe on with one cloth, hand buff with a second cloth.  Works nicely on glass after it has been cleaned with Duragloss BRC 46 Glass Cleaner.

Questions or Comments?  Contact Jerry at 224 676 1484